Split Lighting and Power DB

[mbd-uk]

I would like to model a Three Phase Split Lighting and Power and I was using the "Extension" function as detailed on a previous post, but removing the RCD Element.
However, this is not quiet right for me as each split in individually numbered.
Ideally I would like is:
Ways: 1 - 4 Lighting Section
Ways: 5 -12 Power Section

photo attached for understanding

[Mert]

Hi,

That is how EOM works, to be honest. Alternatively you can model your case using two boards, so you can have the way numbers as you wish.

[mbd-uk]

Thanks for the reply Mert, but I am not sure if that will help on this occasion.
I don't believe that is how it works in both installation and testing and commissioning.
The intent of what we are doing is to issue a package of information that closely resembles actual installation.
I don't think Electrical Contractors number in this way.
I show the type of board that I am intending to design and specify.
If this If this is how EOM works, then we stumble on with the application that we have already designed and re-number the installation.
Glad its not a existing installation already numbered, if this can not be modified by the designer

[admin]

Hello,

We are developing a feature that will allow you to overwrite the way numbering. Eventually, this will allow you to meet your requirements.

We will post here when it's ready.

[admin]

Hi,

We have implemented the board way labels editor which will cover your requirements. Please see the example here: https://modecsoft0-my.sharepoint.com/:v:/g/personal/demonoyio_modecsoft_com/EUoHDgGs9UtJmsT1mJbwPFABhmEopvSgLrNZ4szKTKjtMA?nav=eyJyZWZlcnJhbEluZm8iOnsicmVmZXJyYWxBcHAiOiJPbmVEcml2ZUZvckJ1c2luZXNzIiwicmVmZXJyYWxBcHBQbGF0Zm9ybSI6IldlYiIsInJlZmVycmFsTW9kZSI6InZpZXciLCJyZWZlcnJhbFZpZXciOiJNeUZpbGVzTGlua0NvcHkifX0&e=HiGL4h

You can use the latest beta version if you want to try it: https://electricalom.com/site/beta_download.php

We hope that helps